Frequently asked Questions
- How to contact you? ❯
- How to calculate shipping costs? ❯
UP TO 10 YEARS!
Alkyd-urethane paint for Roofs RADUGAMALER 20kg (glossy, frost-resistant)
Glossy alkyd-urethane enamel for metal roofs, metal roof tiles, tinplate and slate. Extra frost-resistant formula; protects against corrosion, precipitation and UV. 20 kg.
- Manufacturer:
- Model:0655550822
- SKU:0001245
- 997
- Country of manufacture:Russia
- Gloss degree:glossy
- Expense:160 - 200 m²
- Drying time:2-3 hours (+20 °C), fully dry in 24 hours
- Packing:20 kg
- Solvent:synthetic solvent, up to 10%
399.00₾
265.00₾
Offer ends in
days
hours
minutes
seconds
In stock
RADUGAMALER is an alkyd-urethane enamel for roofs and metal surfaces exposed to the weather. It forms a glossy, high-hiding finish that resists scratches, impacts, precipitation and UV. Extra frost-resistant formula.
Key advantages
- High hiding power
- Resistant to scratches and impacts
- Resistant to weathering and UV
- Glossy finish
- Dries fast — 2–3 hours at +20 °C
- Extra frost-resistant formula
Where it is used
- Metal roofs
- Metal roof tiles
- Tinplate
- Slate
- Gutters, pipes and other metal surfaces exposed to the weather
The enamel protects the surface from corrosion and precipitation, extends the service life of the roof and gives it a decorative look.
What it can be applied to
RADUGAMALER is applied directly over surfaces painted with alkyd or acrylic paints, and over steel sheets (metal roof tiles) with a factory coating — POLYESTER or ACRYLIC.
Prime first: untreated galvanised steel roofs, as well as aluminium and steel surfaces, must be primed first. Aluminium is roughened before priming.
How to apply
Surface preparation
The surface must be clean and dry — free of dust, oil stains, flaking old paint and blisters.
Thinning
Thin with synthetic solvent — up to 10% by weight. For spray application, also up to 10% by weight.
Coverage
Depends on the surface. On average 1 kg per 8 m² in one coat. 20 kg of enamel covers about 160 m² in one coat — for example, a 100 m² roof takes about 12.5 kg.
Drying time
At +20 °C the enamel is touch-dry in 2–3 hours and fully dry in 24 hours.
Specifications
- Type: alkyd-urethane enamel
- Gloss: glossy
- Surfaces: metal roofs, metal roof tiles, tinplate, slate, gutters
- Coverage: on average 1 kg per 8 m² in one coat
- Thinner: synthetic solvent, up to 10% by weight
- Drying at +20 °C: 2–3 hours, fully dry in 24 hours
- Pack: 20 kg
- Country of manufacture: Russia
Frequently asked questions
Can it be applied over old paint?
Yes, if the old coating is alkyd or acrylic and firmly adhered. Remove flaking paint and blisters before painting.
Is a primer needed?
Not over alkyd or acrylic paint, or over factory-coated metal roof tiles. Untreated galvanised steel, aluminium and steel must be primed first.
How much enamel do I need for a roof?
On average 1 kg per 8 m² in one coat. 20 kg covers about 160 m²; a 100 m² roof takes about 12.5 kg.
The manufacturer reserves the right to change the packaging design, shade and formulation of the product without prior notice. The image is for illustration only: the appearance of the tin and label may differ from the item you receive. The shade on screen depends on your monitor settings and may differ from the actual colour — when matching a colour, rely on a test spray-out rather than on the photograph.
You will definitely need it
Paint roller
20sm|25sm |
Brush
25mm - 102mm |
Bath for rollers
32 x 40sm |
Recommended solvent
0.35l|0.6l|2.5l |
No questions.
Related Products
Tags: სახურავის საღებავი, ალკიდ-ურეთანის საღებავი, გემის საღებავი, მეტალო-ჩერეპიცის საღებავი, saxuravis saghebavi, краска для крыши, эмаль для крыш, алкидно-уретановая краска для крыш, краска для металлочерепицы, roof paint, alkyd urethane paint, metal roof paint, RADUGAMALER, РАДУГАМАЛЕР
Featured Articles
How to prepare the roof of a house before painting
In order for the roof of the house to ..
