Frequently asked Questions
- How to contact you? ❯
- How to calculate shipping costs? ❯
2-24 hours after purchase
NOVOL FINISH finishing putty
- Manufacturer:
- Model:NOVOL-FINISH
- SKU:2507502000
- 998
- Country of manufacture:Poland
- Weight:0,75 kg; 2 kg;
- Drying time:20°C - 25-30 min
- Color:White
NOVOL FINISH — fine finishing putty
NOVOL FINISH is a fine polyester finishing putty for thin layers, small dents and scratches. It is designed for final surface levelling before priming and helps prepare a smooth repair area for the next refinishing stage.
The product is especially practical for small repair zones because it spreads well, sands easily and creates a smooth surface. It can be used on steel, galvanized steel, aluminium, two-component acrylic fillers and old paint coatings.
CHARACTERISTICS:
- Fine finishing polyester putty.
- Suitable for thin layers.
- Designed for small dents and scratches.
- Used for final levelling before priming.
- Easy to sand.
- Creates a smooth surface.
- Very good adhesion to steel, galvanized steel and aluminium.
- Suitable over two-component acrylic fillers.
- Suitable over old paint coatings.
- Mixing ratio: 100 g putty to 2 g hardener.
- Pot life: 4–6 min at 20°C.
- Drying time: 25–35 min at 20°C.
- Sanding: P180–P240 / P240–P320.
- Color: white.
- Pack sizes: 750 g, 2 kg.
Applications
NOVOL FINISH is recommended for small surface defects and final surface levelling before primer. It is especially useful in repair work where a smooth finish is needed without heavy build-up.
- Repair of small dents.
- Repair of scratches and minor defects.
- Final surface levelling.
- Surface preparation before primer.
- Use on metal, galvanized steel, aluminium and old coatings.
How to Use
Before application, the substrate should be cleaned, degreased and prepared according to the material type. Mix the putty with the correct amount of hardener until a uniform colour is achieved, apply with a putty knife in a layer up to 1 mm, then sand after drying with suitable abrasive paper.
- Clean and degrease the substrate.
- Prepare the surface according to substrate type.
- Mix 100 g putty with 2 g hardener.
- Mix thoroughly until uniform colour is achieved.
- Apply a layer up to 1 mm.
- Allow 25–35 min drying at 20°C.
- Sand with P180–P240 or P240–P320.
- Do not apply over wash primers or 1K acrylic / nitrocellulose products.
SEO Text
NOVOL FINISH is a fine finishing putty for thin layers, small dents and scratches. If you need a polyester finishing putty that sands easily, creates a smooth surface and offers good adhesion to steel, galvanized steel, aluminium and old coatings, NOVOL FINISH is a practical choice for automotive repair at GrandMall.Ge.
* The manufacturer reserves the right to make changes in the characteristics, color, configuration and design of the product without warning. The store is not responsible for the changes made by the manufacturer. Protects the painted surface from atmospheric and physical effects. It is resistant to water and detergent.
No questions.
Related Products
Tags: ალუმინის შპაკლი, ალუმინის საგოზავი, aluminis shpakli, aluminis sagozavi, putty aluminium, алюминиевая шпатлевка.
